LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2018 >> 124 Spider Classica, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Ignition System (Service Information) >> Sensor, Camshaft Position >> Removal And Installation >> Removal

Removal And Installation: Removal

  1. Disconnect and isolate the negative battery cable.
  2. Remove the engine thermostat. Refer to THERMOSTAT, REMOVAL AND INSTALLATION .
    GC0175943Courtesy of CHRYSLER GROUP, LLC
  3. Remove the bolt (1a).
  4. Remove the camshaft position sensor (1b).
scientia non olet · About LEMON Manuals