LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2018 >> 124 Spider Classica, Automatic Trans >> Repair and Diagnosis >> Body & Frame >> Frames, Subframes & Crossmembers >> Frame And Bumpers >> Frame >> CROSSMEMBER, Front Reinforcement >> Removal And Installation >> Removal

Removal And Installation: Removal

GC0175540Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect and isolate the negative battery cable.
  2. Raise and support the vehicle, Refer to HOISTING, STANDARD PROCEDURE .
  3. Remove the screws (1) on the belly pans under the gearbox.
  4. Remove the screws (2a) and remove the front crossmember (2b).
scientia non olet · About LEMON Manuals