LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2018 >> 124 Spider Classica, Automatic Trans >> Repair and Diagnosis >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Electronic Control Modules (Service Information) >> Module, Lighting Supply (LSM) >> Removal And Installation >> Removal

Removal And Installation: Removal

  1. Remove the front door sill plate. Refer to PLATE, SCUFF, DOOR, REMOVAL AND INSTALLATION .
  2. Remove the transmission shift lever handle. For automatic. Refer to SHIFTER, TRANSMISSION, REMOVAL AND INSTALLATION . For manual. Refer to KNOB, GEARSHIFT, REMOVAL AND INSTALLATION .
  3. Remove the steering column opening cover. (Refer to SHROUD, STEERING COLUMN, LOWER and SHROUD, STEERING COLUMN, UPPER .
  4. Remove the HVAC duct. Refer to DUCT, INSTRUMENT PANEL, CENTER, REMOVAL AND INSTALLATION .
  5. Remove the Body Control Module access cover. Refer to MODULE, BODY CONTROL (BCM), REMOVAL AND INSTALLATION .
    GC0176176Courtesy of CHRYSLER GROUP, LLC
  6. Disconnect the wire harness connectors (1) from the Lighting System Module (LSM).
  7. Remove the LSM (2a) disengaging it from the retaining clips (2b).
scientia non olet · About LEMON Manuals