LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2017 >> 500L Pop >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Electronic Control Modules (Service Information) - 500L >> Module, Radio Receiver >> Installation

Module, Radio Receiver: Installation

GC0176789Courtesy of CHRYSLER GROUP, LLC
  1. Connect the antenna connectors (2).
  2. Connect the radio electrical connector (1).
  3. Insert the radio (3) into the instrument panel.
    GC0176811Courtesy of CHRYSLER GROUP, LLC
  4. Install and securely tighten the four mounting fasteners (1a).
  5. Install the switch pod. Refer to POD, SWITCH, INSTALLATION .
  6. Connect the negative battery cable.
NOTE:

The radio must be programmed after a radio replacement. Refer to MODULE, RADIO RECEIVER, MODULE PROGRAMMING .

scientia non olet · About LEMON Manuals