LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2017 >> 500 E >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Collision/Avoidance >> Electronic Control Modules (Service Information) 500 - Except Electric >> Module, Radio Receiver >> Module Programming >> Program The Radio

Program The Radio

  1. Connect the scan tool.
  2. Check vehicle for DTCs.
  3. Clear all stored DTCs.
  4. Turn the ignition OFF, then ON and confirm DTCs are gone.
  5. Go to BCM >> Misc. Functions >> Proxi Alignment.

If required, continue to programming the next module.