When Monitored And Set Conditions
Set Conditions:
- No signal received.
| Possible Causes |
|---|
| MALFUNCTION OF TRANSMISSION CONTROL MODULE (TCM) TERMINALS OR CONNECTOR |
| MALFUNCTION OF TRANSMISSION OUTPUT SPEED SENSOR TERMINALS OR CONNECTOR |
| SHORT CIRCUIT TO GROUND ON THE WIRING OF THE TRANSMISSION OUTPUT SPEED SENSOR SIGNAL |
| SHORT CIRCUIT TO GROUND ON THE WIRING OF THE TRANSMISSION OUTPUT SPEED SENSOR RETURN SIGNAL |
| SHORT CIRCUIT TO BATTERY ON THE WIRING OF THE TRANSMISSION OUTPUT SPEED SENSOR SIGNAL |
| SHORT CIRCUIT TO BATTERY ON THE WIRING OF THE TRANSMISSION OUTPUT SPEED SENSOR RETURN SIGNAL |
| OPEN CIRCUIT ON THE WIRING OF THE TRANSMISSION OUTPUT SPEED SENSOR SIGNAL |
| OPEN CIRCUIT ON THE WIRING OF THE TRANSMISSION OUTPUT SPEED SENSOR RETURN SIGNAL |
| MALFUNCTION OF TRANSMISSION OUTPUT SPEED SENSOR |
| FAULT OF TRANSMISSION CONTROL MODULE (TCM) |
Always perform the PRE-DIAGNOSTIC TROUBLESHOOTING PROCEDURE before proceeding. (Refer to PRE-DIAGNOSTIC TROUBLESHOOTING PROCEDURE) .