Removal And Installation: Bezel

REMOVAL 

1. Disconnect and isolate the negative battery cable.
2. Remove the appropriate power window switch from the door trim panel. Refer to SWITCH, POWER WINDOW, REMOVAL AND INSTALLATION .

   Courtesy of CHRYSLER GROUP, LLC

3. Using a suitable tool, release and separate the power window switch mounting (1a) from the switch assembly (1b).

INSTALLATION 

1. Position and secure the power window switch to the switch bezel.
2. Install the power window switch to the door trim panel. Refer to SWITCH, POWER WINDOW, REMOVAL AND INSTALLATION .
3. Connect the negative battery cable.