LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2017 >> 124 Spider Classica, Automatic Trans >> Repair and Diagnosis >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Electronic Control Modules (Service Information) >> Module, Blind Spot (BSM) >> Removal And Installation

Removal And Installation

Two blind spot modules are used in this vehicle, one for the left side and one for the right side. Each blind spot module is integral to the blind spot sensor on the same side of the vehicle. Refer to SENSOR, BLIND SPOT, REMOVAL AND INSTALLATION .

NOTE:

If the Blind Spot Module (BSM) is replaced, the BSM calibration procedure will need to be performed.

Refer to MODULE, BLIND SPOT (BSM), MODULE PROGRAMMING .

scientia non olet · About LEMON Manuals