LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2017 >> 124 Spider Abarth, Standard Trans >> Repair and Diagnosis >> Suspension >> Rear Suspension >> Arm, Lower Control >> Removal And Installation >> Front >> Installation

Removal And Installation: Front: Installation

  1. Position the control arm in the vehicle.
  2. Position a NEW  control arm to crossmember eccentric bolt complete with washer and tighten it to the proper specification. Refer to TORQUE SPECIFICATIONS  .
  3. Install and tighten the control arm to knuckle mounting nut to the proper specification. Refer to TORQUE SPECIFICATIONS  .
  4. Install the tire and wheel assembly. Refer to REMOVAL AND INSTALLATION .
  5. Remove the support and lower the vehicle.
  6. Preform a rear wheel alignment. Refer to WHEEL ALIGNMENT, STANDARD PROCEDURE .
scientia non olet · About LEMON Manuals