LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2017 >> 124 Spider Abarth, Standard Trans >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Restraints (Service Information) >> Buckle, Seat Belt >> Removal And Installation >> Installation

Removal And Installation: Installation

  1. Connect the wire harness connector and position the wiring.
  2. Position the front seat belt buckle.
  3. Install the seat belt buckle screw then tighten it to the proper specification. Refer to TORQUE SPECIFICATIONS  .
  4. Install the rear screws for the seat and move the seat back into the proper position.
  5. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.
scientia non olet · About LEMON Manuals