Pump, Water: Installation: 1.4L

Clean the gasket mating surfaces.

Fig 1: Sealant
Courtesy of CHRYSLER GROUP, LLC
Apply a strip of silicone sealant to the contact surfaces between the water pump and the engine block.

Fig 2: Inner Timing Belt Cover, Water Pump, Nuts & Bolts
Courtesy of CHRYSLER GROUP, LLC
Position the water pump (1a) onto the engine block.
Install the three mounting bolts (1b) and nut (1c). Tighten to 10 N.m (89 in. lbs.).
Install the inner timing belt cover (2). Tighten the bolt to 10 N.m (89 in. lbs.).
Rotate pump by hand to check for freedom of movement.

Fig 3: Timing Belt Routing & Assembly
Courtesy of CHRYSLER GROUP, LLC
Install the timing belt (1). Refer to BELT, TIMING, INSTALLATION .
Evacuate air and fill the cooling system. Refer to STANDARD PROCEDURE .