LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2016 >> 500L Easy, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Ignition System (Service Information) 500L >> Sensor, Knock >> Removal >> Removal

Sensor, Knock: Removal: Removal

Fig 1: Knock Sensor, Connector & Bolt
GC0152355Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect and isolate the negative battery cable.
  2. Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
  3. Remove the belly pan. Refer to BELLY PAN, REMOVAL .
  4. Remove the knock sensor electrical connector (1).
  5. Remove the mounting bolt (3) and knock sensor (2).
scientia non olet · About LEMON Manuals