Unit, Electric Vehicle Control (EVCU): Installation: Installation

Fig 1: Electronic Vehicle Control Unit (EVCU) & Electrical Connectors

Courtesy of CHRYSLER GROUP, LLC

1. Connect the two electronic vehicle control unit (EVCU) electrical connectors (1), and install the EVCU (2).
   Fig 2: Electronic Vehicle Control Unit (EVCU) Bracket Bolts

   Courtesy of CHRYSLER GROUP, LLC
2. Install and tighten the EVCU bracket bolts to 24 N.m (18 ft. lbs.).
3. Install the electric motor trim cover. Refer to MOUNT, MOTOR, INSTALLATION .
4. Power-up the 12-volt system. Refer to ELECTRIC VEHICLE CONTROL SYSTEM, STANDARD PROCEDURE .