Backup Battery

Fig 1: Vehicle Tracking Module (VTM)

Courtesy of CHRYSLER GROUP, LLC

1. Disconnect the negative battery cable.
2. Remove the Vehicle Tracking Module (VTM) (1) from the vehicle. Refer to VEHICLE TRACKING MODULE (VTM) .
   Fig 2: Backup Battery Cover

   Courtesy of CHRYSLER GROUP, LLC
3. Remove the backup battery cover (1).
   Fig 3: Backup Battery

   Courtesy of CHRYSLER GROUP, LLC
4. Position the backup battery (1) next to the VTM leaving the backup battery connected.
   Fig 4: Connector End

   Courtesy of CHRYSLER GROUP, LLC
   NOTE:

   Do not pull on the wires to disconnect the connector from the VTM doing so will damage VTM or the battery connector.

5. Grab the backup battery connector by the connector end (1) and gently wiggle back and forth while pulling up.

To replace the SUBSCRIBER IDENTIFICATION MODULE (SIM) CARD. Refer to SUBSCRIBER IDENTIFICATION MODULE (SIM) CARD .