LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2012 >> 500 Abarth >> Repair and Diagnosis >> Engine Performance >> Tune-Up >> Ignition System (Code EAB) (Service Information) >> Sensor, Knock >> Removal >> Removal

Sensor, Knock: Removal: Removal

Fig 1: Knock Sensor, Connector & Bolt
GC0152355Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect and isolate the negative battery cable.
  2. Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
  3. Remove the belly pan. Refer to BELLY PAN, REMOVAL .
  4. Remove the knock sensor electrical connector (1).
  5. Remove the mounting bolt (3) and knock sensor (2).
scientia non olet · About LEMON Manuals