LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2012 >> 500 Abarth >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Electronic Control Modules (Service Information) >> Standard Procedure >> Program The TPM (Tire Pressure Monitor Module)

Program The TPM (Tire Pressure Monitor Module)

  1. Connect the scan tool.
  2. Check vehicle for DTCs.
  3. Clear all stored DTCs.
  4. Turn car OFF then ON and confirm DTCs are gone.
  5. Go to TPM >> Misc. Functions >> Proxi Alignment.

If required, continue to programming the next module.

scientia non olet · About LEMON Manuals