Transverse Leaf Spring: Installation
Inspect spring making sure there are not any cracked or broken leaves. Inspect all rubber mounts and inter leaf shims for wear or damage. To install transverse leaf spring, reverse removal procedure.
TIGHTENING SPECIFICATIONS
| Application | Ft. Lbs. (mkg) | |
|---|---|---|
| Rear Wheel Hub Nut | 112 (15.5) | |
| Leaf Spring Mounting Pad-to-Control Arm | 22 (3.0) | |
| Control Arm-to-Bearing Carrier | ||
| Pivot Bolt | 58(8.0) | |
| Control Arm-to-Chassis Pivot Bolt | 36 (5.0) | |
| Control Arm Pivot Shaft End Nuts | 32 (4.4) | |
| Upper Shock Absorber Mount | 18 (2.5) | |
| Lower Shock Absorber Mount | 43 (6.0) | |
| Brake Backing Plate Assembly-to-Bearing Carrier | 18 (2.5) | |