Model 128, 131 & X1/9 Front
Place front wheels in straight-ahead position. If toe-in is not within specifications, loosen sleeve locking nut on tie rods. To adjust, rotate hexagon on ball pin to set toe-in to specifications. Hold hexagon in position and lock nut against tie rod sleeve.
WHEEL ALIGNMENT SPECIFICATIONS
| Application | Caster (Degrees) | Camber (Degrees) | Toe-In (Inches) | Toe-Out On Turns (Degrees) | ||
|---|---|---|---|---|---|---|
| Inner | Outer | |||||
| Model 124 | ||||||
| Sport Coupe | 3 ± 1/2 | 1/4 ± 1/2 | 13/64 to 23/64 | ..... | ..... | |
| Sport Spider | 3 1/6 ± 1/2 | 1/6 ± 1/2 | 5/32 to 5/16 | ..... | ..... | |
| Model 128 Front | ||||||
| Sedan & Wagon | 1 2/3 ± 1/2 | 1 2/3 ± 1/2 | -1/8 to 3/64 | ..... | ..... | |
| Coupe | 1 2/3 ± 1/2 | 1 1/3 ± 1/2 | -1/16 to 3/32 | ..... | ..... | |
| Model 128 Rear | ||||||
| Sedan | ..... | 0 ± 1/3 | 1/16 to 7/32 | ..... | ..... | |
| Wagon | ..... | 2/3 ± 1/2 | 1/16 to 7/32 | ..... | ..... | |
| Coupe | ..... | -1 1/6 ± 1/2 | 5/64 to 15/64 | ..... | ..... | |
| Model 131 | ||||||
| Sedan, Coupe & Wagon | 3 3/4 ± 1/2 | 1 ± 1/2 | 15/64 to 25/64 | ..... | ..... | |
| Model X1/9 | ||||||
| Front | 7 ± 1/2 | -1/2 ± 1/2 | 5/64 to 15/64 | ..... | ..... | |
| Rear | ..... | -1 2/3 ± 1/2 | 5/32 to 15/64 | ..... | ..... | |