Fluid Capacities

TRANSAXLE REFILL CAPACITIES ⁽¹⁾

Application

Refill - Qts. (L)

Dry Fill - Qts. (L)

Non-Turbo

⁽²⁾ 4.0 (3.8)

9.1 (8.6)

Turbo

⁽³⁾⁽⁴⁾

7.1 (6.7)

⁽¹⁾	Approximate quantity listed.

⁽²⁾

Add this amount of fluid. Start engine and allow it to idle for at least one minute. With brakes applied, shift transaxle through all gears, ending in Park. Add additional fluid to bring fluid level to 1/8" below ADD mark on dipstick. Recheck fluid level with transaxle at normal operating temperature. Adjust fluid level within HOT range on dipstick.

⁽³⁾	Special filling procedure is required. See DRAINING & REFILLING .

⁽⁴⁾	Capacity not available at time of publication. Fill to COLD mark. Start engine and operate for 2 minutes. Shift transaxle through all gears, ending in Neutral. Recheck fluid level. Adjust fluid level to HOT mark on dipstick.

DIFFERENTIAL REFILL CAPACITIES ⁽¹⁾

Application

Pts. (L)

Turbo AWD

1.1 (.50)

⁽¹⁾	Approximate quantity listed.