LEMON Manuals: Even more car manuals for everyone
Home >> Eagle >> 1998 >> Talon Base, Automatic >> Repair and Diagnosis >> Suspension >> Wheel Alignment Specifications & Adjustment Procedures >> Wheel Alignment Procedures >> Front Camber Adjustment >> 1998 Concorde & Intrepid

1998 Concorde & Intrepid

  1. 1998 Concorde and Intrepid front camber is preset and is not adjustable. If camber is not within specification, strut and steering knuckle are not bent or otherwise damaged, lower strut bracket bolt hole can be oblonged to size of indentation, or .079" (2 mm) in either direction of bolt hole if strut bracket is not marked. Install lower strut attaching bolts and lightly tighten nut.
  2. Pull out or push in top of tire until correct camber is obtained. See WHEEL ALIGNMENT SPECIFICATIONS  table. While holding bolts stationary, tighten nuts to specification. See TORQUE SPECIFICATIONS  table.
scientia non olet · About LEMON Manuals