LEMON Manuals: Even more car manuals for everyone
Home >> Eagle >> 1998 >> Talon Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 11 (Engine Controls - Remove/Install/Overhaul - Turbo) >> Miscellaneous Controls >> A/C Switch >> Installation

A/C Switch: Installation

WARNING: This page is about a different car, the 1997 Eagle Talon. However, it is still accessible from the selected car via links, so may be relevant.
  1. To install, reverse removal procedure. When installing center air outlet, place cool air by-pass lever on center air outlet in the fully downward position. See Fig 2.
  2. Push cool air by-pass damper lever on heater unit all the way toward you. Connect cable on the lever pin. Push the outer cable housing away from cool air by-pass damper lever so no looseness exists in the cable, and then install clip on the cable. See Fig 2.
Fig 1: Locating A/C Switch, Center Air Outlet, Center Panel & Stoppers
G96I01683Courtesy of CHRYSLER CORP.
Fig 2: Installing Center Air Outlet
G96A01684Courtesy of CHRYSLER CORP.
scientia non olet · About LEMON Manuals