Defogger Relay Test
- Remove defogger relay from junction block. See Fig 1
. Using an ohmmeter, check continuity between terminals No. 1 and 3. If continuity exists, go to next step. If continuity does not exist, replace relay.
- Apply battery voltage to terminal No. 3 and ground terminal No. 1. Relay should click. Check continuity between terminals No. 2 and 5. If continuity exists, relay is okay. If continuity does not exist, replace relay.
- Disconnect battery voltage and ground from relay. Relay should click. Check continuity between terminals No. 2 and 5. If continuity exists, contacts are sticking. Replace relay. If continuity does not exist, relay is okay.
Courtesy of CHRYSLER CORP.