LEMON Manuals: Even more car manuals for everyone
Home >> Eagle >> 1996 >> Vision ESi, 3.5 F >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Overhaul - 42LE Automatic Transmission >> On-Vehicle Service >> Oil Cooler Flow Check

Oil Cooler Flow Check

  1. With transaxle filled to proper fluid level, disconnect oil cooler return line at transaxle. See Figure. Place container under oil cooler return line.
    CAUTION: DO NOT  obtain more than one quart of fluid or transaxle may be damaged.
  2. Apply parking brake. Start engine and allow to idle. Place gearshift in Neutral. Check fluid flow from oil cooler return line.
  3. If fluid flow is intermittent or it takes more than 20 seconds to obtain one quart of fluid, replace oil cooler. Reinstall oil cooler return line. Fill to proper fluid level with Mopar ATF Plus-Type 7176.
scientia non olet · About LEMON Manuals