Instrument Cluster Test 12D - Brake Warning Light

WARNING: This page is about a different car, the 1996 Plymouth Breeze, 1996 Dodge Stratus, and 1996 Chrysler Cirrus. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Perform INSTRUMENT CLUSTER TEST 12A before proceeding with this test. For connector terminal identification and wiring diagrams, see CONNECTOR IDENTIFICATION section in this article. Perform VERIFICATION TEST VER-1A after each repair.

Disconnect parking brake switch connector and ensure connector is clean and not damaged. Connect a jumper wire between parking brake switch connector and ground. If brake warning light illuminates, replace parking brake switch. If brake warning light does not illuminate, repair open Gray wire between parking brake switch and instrument cluster.