LEMON Manuals: Even more car manuals for everyone
Home >> Eagle >> 1996 >> Talon Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 32 (A/C-Heater System - Automatic) >> Testing >> A/C-Heater System Test Procedure >> DRB Volt-Ohmmeter

DRB Volt-Ohmmeter

WARNING: This page is about a different car, the 1995 Eagle Vision, 1995 Dodge Intrepid, 1995 Chrysler New Yorker, 1995 Chrysler LHS, and 1995 Chrysler Concorde. However, it is still accessible from the selected car via links, so may be relevant.
  1. To access DRB volt-ohmmeter mode, connect Red volt/ohmmeter test lead to Red port, located on right-top side of DRB.
  2. To use DRB voltmeter, press VOLT/OHM key once. Touch test probe to connector or wire to be measured. Read voltage on DRB display. When voltage testing is complete, press VOLT/OHM key 3 times to exit voltmeter mode.
  3. To use DRB ohmmeter, press VOLT/OHM key twice. Touch test probe to connector or wire to be measured. Read resistance to circuit ground on DRB display. When resistance testing is complete, press VOLT/OHM key twice to exit ohmmeter mode.
scientia non olet · About LEMON Manuals