EVAP Solenoid Control Circuit

WARNING: This page is about a different car, the 1995 Eagle Vision, 1995 Dodge Intrepid, and 1995 Chrysler Concorde. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: For connector terminal ID, see CONNECTOR IDENTIFICATION. For wiring diagram, see WIRING DIAGRAMS - 3.3L article in ENGINE PERFORMANCE. After each repair, perform TEST VER-2 .

Using an external ohmmeter, check resistance across EVAP solenoid terminals. If resistance is more than 5 ohms, repair open Light Green/Black wire. If resistance is less than 5 ohms, replace EVAP solenoid and fuse No. 20.