LEMON Manuals: Even more car manuals for everyone
Home >> Eagle >> 1995 >> Vision TSi >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Tests W/Codes - 3.3L >> Test NTC-10A >> Checking Solenoid Operations

Checking Solenoid Operations

NOTE: For connector terminal ID, see CONNECTOR IDENTIFICATION. For wiring diagram, see WIRING DIAGRAMS - 3.3L article in ENGINE PERFORMANCE. After each repair, perform TEST VER-2  .
  1. Using scan tool, actuate purge solenoid. While touching top of canister purge solenoid, feel for operation. If purge solenoid does not operate, replace canister purge solenoid. If purge solenoid operates, go to next step.
  2. Actuate EGR solenoid. While touching top of EGR valve, feel for operation. If EGR solenoid does not operate, replace EGR solenoid. If EGR solenoid operates, go to next step.
  3. If solenoids are operating normally, test is complete.
scientia non olet · About LEMON Manuals