LEMON Manuals: Even more car manuals for everyone
Home >> Eagle >> 1995 >> Vision TSi >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System >> Test 20A >> Right Front Outlet Valve

Right Front Outlet Valve

NOTE: For connector terminal identification, see CONNECTOR IDENTIFICATION. For wiring diagram, see WIRING DIAGRAM.
  1. Using scan tool, read trouble codes. If scan tool displays MAIN RELAY/POWER CIRCUIT FAILURE, go to TEST 14A. If scan tool does not display MAIN RELAY/POWER CIRCUIT FAILURE, go to next step.
  2. Turn ignition off. Disconnect CAB from HCU. See Figure . Inspect 14-pin connector. If connector is faulty, repair as necessary. Perform TEST VER-1A. If any terminals are backed-out, replace HCU. Perform TEST VER-1A. If connector is okay, go to next step.
  3. Using an external ohmmeter, check resistance between terminals No. 7 and 13 at valve block connector. See Figure . If resistance is not 3-6 ohms, replace HCU. Perform TEST VER-1A. If resistance is 3-6 ohms, replace CAB. Perform TEST VER-1A.
scientia non olet · About LEMON Manuals