All Doors Do Not Unlock With Transmitter
- Ensure driver's door is in UNLOCKED position. Using a voltmeter, check for a voltage pulse on Remote Keyless Entry (RKE) module Black connector terminal No. 3 (Pink/Black wire). See Figure . Press RKE transmitter unlock button once. If voltage does not pulse, replace RKE module. If voltage pulses, repair circuit between RKE module and door lock motor.
- Using a voltmeter, check for a quick voltage pulse on RKE module Black connector terminal No. 1 (Pink/Violet wire). See Figure . Press RKE transmitter unlock button twice within 5 seconds. If voltage does not pulse, replace RKE module. If voltage pulses, repair circuit between Black connector terminal No. 1 and unlock relay.