Cruise Control Switches
Access cruise control switches. Disconnect both cruise control switch 2-pin connectors. Using an ohmmeter, check both cruise control switches. If either cruise control switch does not test as specified, replace defective switch. See CRUISE CONTROL SWITCHES . Also, see CONNECTOR IDENTIFICATION .
CRUISE CONTROL SWITCHES
| Switch Position | Check Between | Ohms | |||
|---|---|---|---|---|---|
| ON/CRUISE/OFF Switch | |||||
| (1) | 1 & 2 | 22,351-22,848 | |||
| OFF | 1 & 2 | 0-.5 | |||
| ON | 1 & 2 | 644-668 | |||
| SET/RESUME Switch | |||||
| (1) | 1 & 2 | No Continuity | |||
| RES/ACCEL | 1 & 2 | 5558-5682 | |||
| SET/COAST | 1 & 2 | 1978-2022 | |||
|
|||||