Fuel System Pressure Release: Stratus
WARNING: This page is about a different car, the 1995 Dodge Stratus, 1995 Dodge Avenger, 1995 Chrysler Sebring, and 1995 Chrysler Cirrus. However, it is still accessible from the selected car via links, so may be relevant.
Turn ignition off. Disconnect negative battery cable. Remove fuel tank filler cap. Remove fuel pressure test port cap. Fuel pressure test port is located in center of fuel rail. Place end of Hose (C-4799-1) into an approved fuel container. Connect opposite end of hose to fuel pressure test port. Fuel pressure will bleed from fuel rail as hose is connected to fuel pressure test port.