LEMON Manuals: Even more car manuals for everyone
Home >> Eagle >> 1995 >> Summit Wagon AWD, Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Testing >> Throttle Position Sensor Test

Throttle Position Sensor Test

  1. Disconnect sensor connector. Resistance between terminals No. 1 and 4 should be 3500-6500 ohms. See Figure . Use an analog ohmmeter to measure resistance between terminals No. 1 and 3.
  2. Slowly open throttle valve to wide open throttle. Resistance should change smoothly as throttle is opened. Replace throttle position sensor if it does not test correctly.
scientia non olet · About LEMON Manuals