LEMON Manuals: Even more car manuals for everyone
Home >> Eagle >> 1994 >> Vision TSi >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Tests W/Codes - 3.3L >> Diagnostic Charts >> Test NTC-6A - Checking Map Sensor Calibration

Test NTC-6A - Checking Map Sensor Calibration

NOTE: After each repair, perform TEST VER-2 .
  1. Turn engine off. Install vacuum "T" in MAP sensor vacuum hose. Install vacuum gauge. Start engine, and let it idle. If engine will not idle, maintain a constant RPM above idle. Go to next step.
  2. Using DRB, read MAP gauge value. If reading is not within one in. Hg of vacuum gauge reading, replace MAP sensor. If reading is within one in. Hg of vacuum gauge reading, test is complete.
scientia non olet · About LEMON Manuals