LEMON Manuals: Even more car manuals for everyone
Home >> Eagle >> 1994 >> Talon ES, Standard >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System >> Diagnosis & Testing >> Abs Power Relay

Abs Power Relay

  1. Remove ABS power relay. See ELECTRONIC CONTROL MODULE (ECM) & ABS POWER RELAY under REMOVAL & INSTALLATION. Disconnect ABS power relay connector. Using ohmmeter, check for continuity between ABS power relay connector terminals No. 1 and No. 3. See Fig 1 . If continuity does not exist, go to next step. If continuity exists, replace relay.
  2. Check for continuity between terminals No. 2 and No. 4. If continuity exists, go to next step. If continuity does not exist, replace relay.
  3. Connect positive lead of 12-volt power source to terminal No. 2 and negative lead to terminal No. 4. Check for continuity between terminals No. 1 and No. 3. If continuity exists, relay is okay. If continuity does not exist, replace relay.
Fig 1: Testing ABS Power Relay
G91G08042Courtesy of CHRYSLER CORP.
scientia non olet · About LEMON Manuals