LEMON Manuals: Even more car manuals for everyone
Home >> Eagle >> 1994 >> Talon ES, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 12 (Engine Controls - Tests W/Codes - Body Control Computer) >> Diagnostic Procedure >> Entering On-Board Diagnostics >> SELECT SYSTEM Mode

SELECT SYSTEM Mode

WARNING: This page is about a different car, the 1994 Eagle Vision, 1994 Dodge Intrepid, 1994 Chrysler New Yorker, 1994 Chrysler LHS, and 1994 Chrysler Concorde. However, it is still accessible from the selected car via links, so may be relevant.
  1. This mode enables technician to select system to be diagnosed. At DRB menu, press "4" (SELECT SYSTEM) key. Press ENTER key. DRB will display SELECT SYSTEM menu.
  2. At SELECT SYSTEM menu, press "3" (BODY) key. Press ENTER key. DRB should display BUS TEST IN PROGRESS, BUS OPERATIONAL. After a moment, SELECT MODULE menu should appear.
  3. If a bus failure message appears during BUS TEST IN PROGRESS, proceed to VEHICLE COMMUNICATIONS. Always start at TEST 1A.
scientia non olet · About LEMON Manuals