Test 7B - Short To Battery
WARNING: This page is about a different car, the 1994 Plymouth Acclaim, 1994 Dodge Spirit, and 1994 Chrysler LeBaron. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
For connector terminal identification, see CONNECTOR IDENTIFICATION. For wiring diagram, see WIRING DIAGRAMS. After each repair, perform TEST VER-1.
CAUTION:
Always turn ignition switch to OFF position before disconnecting or connecting any module connector.
- Using an external ohmmeter, check resistance between Powertrain Control Module (PCM) connector terminal No. 7 (Orange wire) and terminal No. 26 (Violet/Brown wire). If resistance is less than 5 ohms, repair short between Violet/Brown and Orange wires.
- If resistance is more than 5 ohms, check resistance between PCM connector terminal No. 7 (Orange wire) and terminal No. 46 (White/Black wire). If resistance is less than 5 ohms, repair short between White/Black and Orange wires. If resistance is more than 5 ohms, replace PCM.