LEMON Manuals: Even more car manuals for everyone
Home >> Eagle >> 1994 >> Summit Wagon AWD, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (Heater System) >> Testing >> Blower Motor Relay

Blower Motor Relay

WARNING: This page is about a different car, the 1994 Plymouth Colt, 1994 Mitsubishi Mirage, 1994 Eagle Summit, and 1994 Dodge Colt. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove relay. See Fig 1 and Fig 2. Using ohmmeter, check continuity between terminals No. 1 and 3. Continuity should not exist. Check continuity between terminals No. 2 and 4. Ensure continuity is present.
  2. Connect 12-volt battery to terminals No. 2 and 4. See Fig 1 and Fig 2. Ensure continuity exists between terminals No. 1 and 3 with battery voltage applied. Replace relay if continuity is not as specified.
Fig 1: Locating & Testing Blower Motor Relay (1 Of 2)
G94C10019Courtesy of CHRYSLER CORP.
Fig 2: Locating & Testing Blower Motor Relay (2 Of 2)
G94F10020Courtesy of CHRYSLER CORP.
scientia non olet · About LEMON Manuals