LEMON Manuals: Even more car manuals for everyone
Home >> Eagle >> 1994 >> Summit LX, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 37 (Axle Shafts - Front) >> Band & Boot Identification

Band & Boot Identification

WARNING: This page is about a different car, the 1994 Mitsubishi Precis, 1993 Mitsubishi Precis, 1992 Mitsubishi Precis, 1991 Mitsubishi Precis, and 1990 Mitsubishi Precis. However, it is still accessible from the selected car via links, so may be relevant.

Band identification numbers are stamped on inside edge of band. See Fig 1. Boot identification numbers are stamped on largest ridge of boot. See BAND & BOOT APPLICATION .

NOTE: The following are possible types of Constant Velocity (CV) joints used on axle shaft: Birfield Joint (BJ), Double Offset Joint (DOJ), Rzeppa Joint (RJ) and Tripod Joint (TJ). Determine type of CV joint used prior to disassembly. See AXLE SHAFT SPECIFICATIONS . Note type of boot and location prior to removal. See BAND & BOOT APPLICATION . Install a NEW retaining ring each time axle shaft is removed from transaxle.
Fig 1: Locating Band & Boot Identification Numbers
G91I01904Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
BAND & BOOT APPLICATION

Band Large Band Small Boot Application
Precis (1) (1) (1)
(1) Boots and bands are packaged as a kit. Kits are broken down by type of joint. No specifications or identification numbers given by manufacturer.