LEMON Manuals: Even more car manuals for everyone
Home >> Eagle >> 1994 >> Summit LX, Automatic >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System >> Diagnosis & Testing >> Clearing DTCS >> Without Scan Tool

Without Scan Tool

  1. To erase one DTC, locate diagnostic DTC erasure connector. See Fig 1 .
  2. Connect a jumper wire across DTC erasure connector terminals. Turn ignition on. ANTI-LOCK warning light should come on. After 3 seconds, turn ignition off. Disconnect jumper wire. Turn ignition on. To erase more than one DTC, repeat procedure.
ABS/DTC ERASURE CONNECTOR LOCATION

Application Location
Colt, Mirage & Summit On Driver Side Of Center Console Behind Radio
Fig 1: Locating DTC Erasure Connector
G96J19595Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals