LEMON Manuals: Even more car manuals for everyone
Home >> Eagle >> 1993 >> Vision ESi >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Anti-Theft Systems >> Keyless Entry System - Remote >> Programming >> Transmitter >> Concorde, Intrepid & Vision

Concorde, Intrepid & Vision

  1. Remove upper center bezel from instrument panel and locate traction control Black connector. See Fig 1 . Disconnect connector. Turn ignition switch to ON position.
  2. Ground connector pin No. 4. Door locks will lock and unlock to indicate that system is ready to receive codes. Trunk solenoid will not cycle at this time. Press any button on transmitter to set code. Locks will cycle to confirm programming.
  3. If a second transmitter is used, it must be set at this time. Press any button on second transmitter and wait for locks to cycle. Disconnect program line from ground. This returns system to normal operation. Replace upper center bezel to instrument panel.
Fig 1: Traction Control Switch Location (Concorde, Intrepid, Vision)
G93A85373Courtesy of CHRYSLER CORP.
Fig 2: Traction Control Switch Connectors (All Models)
G93D85376Courtesy of CHRYSLER CORP.
scientia non olet · About LEMON Manuals