LEMON Manuals: Even more car manuals for everyone
Home >> Eagle >> 1992 >> Talon Base, Standard >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System >> Diagnosis & Testing >> Code 21 >> "G" Force Sensor

"G" Force Sensor

  1. Test "G" force sensor. See "G" FORCE SENSOR TEST  under DIAGNOSIS & TESTING. If sensor is okay, go to next step. If sensor is faulty, replace sensor. See "G" FORCE SENSOR  under REMOVAL & INSTALLATION.
  2. Disconnect ECU wiring harness connector. Turn ignition switch to ON position. Using a DVOM, measure voltage between ECU connector terminal No. 6 (Blue/Black wire) and ground. See Figure . If battery voltage does not exist, repair or replace wiring harness between "G" force sensor and ECU. If battery voltage exists, "G" force sensor circuit is okay. Replace faulty ECU.
scientia non olet · About LEMON Manuals