LEMON Manuals: Even more car manuals for everyone
Home >> Eagle >> 1992 >> Talon Base, Automatic >> Repair and Diagnosis >> Electrical >> Starter >> Testing (On-Vehicle) >> Ignition Switch Test >> Laser & Talon

Laser & Talon

  1. Remove steering column covers to locate ignition switch 6-pin connector. Using a voltmeter, backprobe White wire of ignition switch 6-pin connector to check for battery voltage. If battery voltage does not exist, replace main fusible link.
  2. If battery voltage exists at White wire, backprobe Black/Yellow wire of ignition switch 6-pin connector and turn ignition switch to START position. If battery voltage does not exist at Black/Yellow wire (starter wire), replace ignition switch.
scientia non olet · About LEMON Manuals