LEMON Manuals: Even more car manuals for everyone
Home >> Eagle >> 1992 >> Summit Wagon Base, 1.8 D, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - System/Component Tests >> Engine Sensors & Switches >> Idle Position Switch

Idle Position Switch

  1. Disconnect Throttle Position Sensor (TPS) connector. Connect ohmmeter between TPS connector terminals No. 3 and 4. See Figure or Figure .
  2. With accelerator pedal pressed, no continuity should be present. With accelerator pedal released, continuity should be present. If idle switch continuity is not as specified, replace TPS.
scientia non olet · About LEMON Manuals