LEMON Manuals: Even more car manuals for everyone
Home >> Eagle >> 1992 >> Summit Base, 2D Hatchback, Automatic >> Repair and Diagnosis >> Steering >> Power Steering >> Steering System - Power >> Lubrication >> Hydraulic System Bleeding >> All Models

All Models

  1. Disconnect coil high tension wire. Crank engine 10-15 seconds while turning steering wheel left and right. Connect coil high tension wire. Start engine, and let it idle. Turn steering wheel left and right until no air bubbles appear in oil reservoir.
  2. Check fluid level, and ensure fluid is not milky. Turn steering wheel left and right, and ensure fluid level does not change. If fluid level changes more than .25" (6.3 mm) or if pump is noisy, fill with fluid to MAX mark on dipstick again. Repeat procedure until air bubbles are no longer present in fluid and fluid level stabilizes.
  3. To bleed rear system on 4WS models, see 4WS (REAR SYSTEM).
scientia non olet · About LEMON Manuals