LEMON Manuals: Even more car manuals for everyone
Home >> Eagle >> 1991 >> Talon Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 9 (Disc) >> Adjustments >> Stoplight Switch

Stoplight Switch

WARNING: This page is about a different car, the 1993 Plymouth Laser, 1993 Eagle Talon, 1992 Plymouth Laser, and 1992 Eagle Talon. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ensure brake pedal height is within specification. Refer to BRAKE PEDAL HEIGHT  under ADJUSTMENTS. Disconnect stoplight switch connector. Loosen stoplight switch lock nut.
  2. Rotate stoplight switch clockwise until brake pedal arm begins to move, then rotate counterclockwise 1/2 to 1 turn. Tighten stoplight switch lock nut. Reconnect stoplight switch connector.
  3. Distance from brake pedal arm to tip of threaded portion of stoplight switch should be .02-.04" (0.5-1.0 mm). Ensure stoplights are not illuminated with brake pedal released.
scientia non olet · About LEMON Manuals