LEMON Manuals: Even more car manuals for everyone
Home >> Eagle >> 1991 >> Premier ES >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Throttle Position Sensor >> Removal & Installation

Removal & Installation

Disconnect negative battery cable. Remove air cleaner. Disconnect 3-pin connector at sensor. Remove 2 screws attaching TPS to throttle body. Remove TPS. To install, reverse removal procedure. Tighten to specification. See TORQUE SPECIFICATIONS  at end of article.

scientia non olet · About LEMON Manuals