LEMON Manuals: Even more car manuals for everyone
Home >> Eagle >> 1990 >> Premier ES >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (Brake System Bleeding) >> Brake System Bleeding >> Pressure Bleeding

Pressure Bleeding

WARNING: This page does not describe the selected car, but rather 16 other vehicles, including the 1985 Mercury Topaz, 1985 Mercury Marquis, 1985 Mercury Lynx, 1985 Mercury Grand Marquis, and 1985 Mercury Cougar. However, it is still accessible from the selected car via links, so may be relevant.
  1. To prevent dirt from falling into reservoir, clean master cylinder and cover/diaphragm assembly, With pressure tank at least 1/3 full, connect to master cylinder using adapters.
  2. Install bleeder hose to wheel assembly being serviced. Submerge other end of hose in clean glass jar partially filled with clean brake fluid.
  3. Open release valve on pressure bleeder. Open bleed screw 3/4-1 turn. Close bleed screw when brake fluid is clear and free of bubbles. Bleed remaining wheel assemblies in sequence and in same manner. Remove pressure bleeding tool.
scientia non olet · About LEMON Manuals