LEMON Manuals: Even more car manuals for everyone
Home >> Eagle >> 1990 >> Premier ES >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (Brake System Bleeding) >> Brake System Bleeding >> Manual Bleeding

Manual Bleeding

WARNING: This page does not describe the selected car, but rather 16 other vehicles, including the 1985 Mercury Topaz, 1985 Mercury Marquis, 1985 Mercury Lynx, 1985 Mercury Grand Marquis, and 1985 Mercury Cougar. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Ensure that fluid level in master cylinder is adequate at all times during bleeding procedure.
  1. Fill master cylinder with clean brake fluid. Install bleeder hose to wheel assembly being serviced. Submerge other end of hose in clean glass jar partially filled with clean brake fluid.
  2. Depress brake pedal slowly through its full travel and hold. Open bleed screw 3/4-1 turn. Close bleed screw. Release brake pedal. Repeat procedure until brake fluid shows no signs of air bubbles.
scientia non olet · About LEMON Manuals