LEMON Manuals: Even more car manuals for everyone
Home >> Eagle >> 1989 >> Premier ES >> Repair and Diagnosis >> Engine Performance >> System >> 2.5L Systems/Tests W/Codes >> Diagnostic Trouble Code (DTC) Identification >> Component Testing >> B+ (Power) Latch, Fuel Pump & Ignition Relays

B+ (Power) Latch, Fuel Pump & Ignition Relays

  1. With relay in de-energized position, relay should have continuity between relay terminals No. 87A and 30. See Figure . Measure resistance between relay terminals No. 85 and 86.
  2. Ohmmeter should read 70-80 ohms for resistor relays and 81-91 ohms for diode relays. Replace relay if not within specification. Not all relays have battery voltage connected to terminal No. 30. Some relays have battery voltage connected to terminals No. 87 or 87A.
scientia non olet · About LEMON Manuals