LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2025 >> Durango R/T Plus >> Repair and Diagnosis >> Engine Performance >> Ignition System (Service Information) >> Solenoid, Variable Valve Timing >> Removal >> Right

Solenoid, Variable Valve Timing: Removal: Right

  1. Disconnect and isolate the negative battery cable.
    NOTE: Mark the Variable Valve Timing (VVT) solenoid connectors (1) with a paint pen or equivalent so that they may be installed to their original locations.
    GC0209969Courtesy of CHRYSLER GROUP, LLC
  2. Mark the intake VVT solenoid (2) and the exhaust VVT solenoid (4) with a paint pen or equivalent so that they may be installed to their original locations.
  3. Disconnect the wire harness connector (1) from the VVT solenoid.
  4. Remove the VVT solenoid mounting bolts (3).
    GC0209970Courtesy of CHRYSLER GROUP, LLC
  5. Pull the VVT solenoid from the cylinder head cover.
  6. The seal (1) can be reused if not damaged.
scientia non olet · About LEMON Manuals